Now you can convert your own swingarm frame into a HARDTAIL
Kit includes ONE pair of laser cut 10mm thick steel axle plates with sissy bar mountings. The 20mm axle slot ( also for 3/4" axles ) or use adapting sleeve/spacers for smaller diameter spindles, giving you 6" axle centre height to bottom of frame.
Made from Electric Resistant Welded steel tubing..similar to your everyday mass produced Honda - Yamaha - Suzuki framework of old.... only ours is probably double the wall thickness at 3.25mm.
For this listing we supply 2 x 33" top rails.. 2 x 26 3/16" bottom rails.. 2 x 12" cross tubes. These lengths should allow you to trim off to suit your needs ( gives a 31" axle centre to the ends of the top & bottom rails ) this type of tube will allow minor adjustments to the bend angle to align up with your existing frame, a well fixed vice will be required
We will also form to a pattern or drawing supplied, to enable you to complete your build and for extra tubing required....combine any length listed with this...to save on delivery cost. Or for a combination of tubing size mixes...... contact us on 07442 496 186
As the axle plates are designed for 1" tube.... cutting or grinding will be required