36.06mm Total Width (24T) Sprocket to convert Harley Davidson 5 Speed Softail, FXR, Dyna, from belt to chain drive & wide tire use.
( 24T ) Big Twins 5 Speed 1986 to 2006 Maximum off-set possible with "O" ring chain use, that clears inner primary in stock position ( OR.. your custom build that requires a 33 splined fitment ) Requires spacer listing #1 & seal #2 on Pre- 1994 models
As a rough guide.... this should be enough to fit a 180mm width tire in most circumstances
1.420" = 36.06mm Total width
0.810" = 20.57mm Off-set.
To work out what trans sprocket width you require, by measuring with a straight edge onto your outer face of a ( old / borrowed or new from our listings ) rear sprocket, already fitted on your wheel ( spaced to allow clearance for your chain to tire ) centered and squared in your frame. Measure the distance from the same edge in contact with the rear sprocket outer face, to the exposed main shaft bearing spacer.
We will work with you to finish the job, by excepting parts back ( Sorry NO refunds on postage are given )and supplying spacers or other sprocket combinations as required.